Philips MCD759D User manual (English) - Page 44

Unable to select Progressive Scan

Page 44 highlights

English Troubleshooting Considerable noise in radio broadcasts. The remote control does not function. The display is dark. Low hum or buzz sound. Low bass response. ✔ Tune in to the correct frequency. ✔ Connect the antennas. ✔ Fully extend the FM wire antenna. Position for best reception and secure to a wall. ✔ Connect an outdoor FM or AM antenna. ✔ Adjust the direction and position for best reception. ✔ Place the antenna farther away from any equipment that may be causing the noise. ✔ Increase the distance between the system and your TV or other equipment. ✔ Select the correct source (DISC or TUNER, for example) before pressing the function button. ✔ Point the remote control at the remote sensor of the unit. ✔ Reduce the distance to the player. ✔ Remove any possible obstacles. ✔ Replace the batteries with new ones. ✔ Check that the batteries are loaded correctly. ✔ Press DIM again. ✔ Place the DVD micro system as far away as possible from electrical devices that may be causing interference. ✔ Check all speakers for correct polarity. Unable to select Progressive Scan The 9 and some buttons on MCD759D and its remote control have no function. ✔ Check that the output of the video signal is switched to 'Pr/Cr Pb/Cb Y'. ✔ The playback of the docked player cannot be stopped using the 9 button on MCD759D and its remote control. ✔ Only the following buttons are available: 2;, ¡1, 2™, 3, 4, DISPLAY/MENU and OK. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

44
English
Tune in to the correct frequency.
Connect the antennas.
Fully extend the FM wire antenna. Position for
best reception and secure to a wall.
Connect an outdoor FM or AM antenna.
Adjust the direction and position for best
reception.
Place the antenna farther away from any
equipment that may be causing the noise.
Increase the distance between the system and
your TV or other equipment.
Select the correct source (DISC or TUNER, for
example) before pressing the function button.
Point the remote control at the remote sensor
of the unit.
Reduce the distance to the player.
Remove any possible obstacles.
Replace the batteries with new ones.
Check that the batteries are loaded correctly.
Press DIM again.
Place the DVD micro system as far away as
possible from electrical devices that may be
causing interference.
Check all speakers for correct polarity.
Check that the output of the video signal is
switched to
'Pr/Cr Pb/Cb Y'.
The playback of the docked player cannot be
stopped using the
9
button on MCD759D and
its remote control.
Only the following buttons
are available:
2;
,
¡1
,
2™
,
3
,
4
,
DISPLAY/MENU
and
OK
.
Considerable noise in radio broadcasts.
The remote control does not function.
The display is dark.
Low hum or buzz sound.
Low bass response.
Unable to select Progressive Scan
The
9
and some buttons on MCD759D
and its remote control have no function.
Troubleshooting