Philips MCM240 User manual - Page 18

English Clock/Timer Setting the clock 1 In standby mode or system on, press and hold DISPLAY/CLOCK on the remote control for more than 3 seconds. ➜ SET CLOCK scrolls on the display. ➜ The clock digits for the hours flash. 2 Press VOLUME (3 / 4) (+/-) to set the hours. 3 Press DISPLAY/CLOCK again. ➜ The clock digits for the minutes flash. 4 Press VOLUME (3 / 4) (+/-) to set the minutes. 5 Press DISPLAY/CLOCK to confirm the time. Note: - The backlight for clock display is dim in standby. Viewing the clock ● Press DISPLAY/CLOCK. ➜ The clock time is displayed. Note: - There is no time display during disc playback. 1 In standby mode or system on, press and hold TIMER on the remote control for more than 3 seconds. ➜ Display sequence scrolls SET TIMER and SELECT SOURCE. ➜ Display sequence shows CD, TUNER and flashes. 2 Press VOLUME (3 / 4) (+/-) to select the sound source. 3 Press TIMER to confirm your desired mode. ➜ The clock digits for the hours flash. 4 Press VOLUME (3 / 4) (+/-) to set the hours. 5 Press TIMER again. ➜ The clock digits for the minutes flash. 6 Press VOLUME (3 / 4) (+/-) to set the minutes. 7 Press TIMER to confirm the time. ➜ Display sequence shows VOL12. 8 Press VOLUME (3 / 4) (+/-) to set the timer volume level. 9 Press TIMER to confirm. ➜ The timer is now set and activated. Activating and deactivating TIMER ● Press TIMER on the remote to turn off the timer or turn on to the last setting again. ➜ If activated, the timer information will display for a few seconds, then the system resumes to the last active source or stays in standby mode. ➜ If deactivated,"OFF" appears. Note: - The system will exit timer setting mode if no button is pressed within 30 seconds. Setting the timer ● The system can be used as an alarm clock, whereby the CD,TUNER is switched on at a set time.The clock time needs to be set first before the timer can be used. ● During setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. 18