Philips MCM309R User manual - Page 27

English Clock/Timer 4 Press TITLE ALBUM/PRESET +/- on the remote) repeatedly to set the minute for the timer to start. 5 Press CLOCK•TIMER (TIMER on the remote) to store the start time. ● At the preset time, the selected source will play. To exit without storing the setting ● Press Ç on the system. To change the preset sleep timer ● Press SLEEP again while the remaining sleep timer is shown. ➜ The display will show the next sleep timer options. To deactivate the sleep timer ● Press SLEEP repeatedly until "OFF" is displayed, or press STANDBY-ON/ECO POWER B. Notes: - When the preset time is reached and the selected disc tray is empty, the next available disc will be selected. If all the disc trays are not available,Tuner will be selected automatically. - During timer setting, if no button is pressed within 70 seconds, the system will exit timer setting mode automatically. Note: - will start flashing when the remaining length of time after activation of the sleep timer is less than 1 minute. To deactivate the TIMER ● Press TIMER ON/OFF on the remote control. ➜ will disappear from the display. To activate the TIMER ● Press TIMER ON/OFF on the remote control. ➜ will appear on the display. Sleep timer setting The sleep timer enables the system to switch to standby mode automatically at a preset time. 1 Press SLEEP on the remote control repeatedly to select a preset time. ➜ The selections are as follows (time in minutes): 15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™ OFF ™ 15 ... 2 When you reach the desired length of time, stop pressing SLEEP. ➜ is shown, except for "OFF" mode. ➜ The sleep timer is now set. To check the remaining length of time after sleep timer is activated ● Press SLEEP once. 27