Philips P44417S User Manual - Page 14
Camera Maintenance - camera driver
UPC - 026616020386
View all Philips P44417S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Then uninstall the driver program named "Camera Driver" under the "Add/ Remove program" from the Windows Control Panel and restart the computer. Reinstall the driver again. 4. After installing the camera software, the camera is not detected by the software: x Some PC's have been shipped without the USB port mode enabled. To enable the USB Port. You must run the system CMOS setup program. This setup program is only available when you power up the computer. The procedure is different for each system so you will need refer to your PC manual for more details. Note: If the "Driver Open Fail" error message pops up when you click the MyCam CIF application, please refer to the "Driver Fix" document included in the CD-Rom on how to resolve. 5. To Uninstall the Camera Driver and AvailaSoft Software : x To uninstall the Camera Driver, go to Control Panel Æ Add/ Remove Programs Æ MyCam CIF Æ Remove. x To uninstall the Photo2Album software, go to Windows Start menu --> Programs--> Photo2Album--> click "Uninstall Photo2Album", or you can go to Control Panel according to the above procedure. To uninstall camera driver To uninstall Photo2Album Camera Maintenance: Maintaining your camera will ensure longer life and will minimize the chances of causing damage to your camera and computer. x Keep the camera away from moisture and extreme temperature. x Clean the outside of the camera with a clean, dry cloth. x Never use harsh or abrasive cleaners or organic solvents on camera or on any of its parts. x Never disassemble or touch the inside of the camera. 14