Philips PT729 User manual - Page 10
English
View all Philips PT729 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
18 ENGLISH C 2 Press the Razor Head Release Button to open the Razor Head Assembly. C 3 Pull the shaving unit off the razor. B C 4 Turn the lock counterclockwise to unlock (A) and remove the retaining frame (B). A C 5 Remove and clean one set of cutters and combs at a time. C 6 Separate the cutter from the comb and clean it with the short bristled side of the brush supplied. Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored. ENGLISH 19 C 7 Clean the inside and outside of the comb with the brush supplied. For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Philips Norelco Shaving Head Cleaning Spray, Model HQ110 or alcohol) and lubricated with one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads. C 8 Replace the set back into the Razor Head Assembly. C Make sure that the two pointy edges of the head fit exactly into the recesses. 9 Repeat the process for the other two sets of cutters and combs. 10 Replace the frame and turn the lock clockwise until it locks into place. C 11 Insert the notch of the shaving unit into 1 the slot in the top of the razor (1) and 2 then close the shaving unit (2). NOTE: If the shaving unit does not close smoothly, make sure you inserted the shaving heads properly and that the retaining frame is locked. 12 Put the Protective Cap on razor to protect heads.