Philips S8880 User manual - Page 19
Each retaining ring has two recesses that fit
View all Philips S8880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3 1 2 1 23 1 19 3 Place the retaining ring holder on the retaining ring, turn it counterclockwise and lift it off the shaving head. Remove the retaining ring from the retaining ring holder and repeat this process for the other retaining rings. Place them aside in a safe place. 4 Remove the shaving heads from the shaving head holder. Discard the used shaving heads immediately to avoid mixing them with the new shaving heads. 5 Place the new shaving heads in the shaving head holder. Note: Make sure the notches on both sides of the shaving heads fit exactly onto the projections in the shaving head holder. 6 Place the retaining ring holder on the retaining ring, place it on the shaving head and turn it clockwise to reattach the retaining ring. Repeat this process for the other retaining rings. -- Each retaining ring has two recesses that fit exactly into the projections of the shaving head holder. Turn the ring clockwise until you hear a click to indicate that the ring is fixed. Note: Hold the shaving head holder in your hand when you reinsert the shaving heads and reattach the retaining rings. Do not place the shaving head holder on a surface, as this may cause damage to the shaving heads.