Philips SA2925R User manual - Page 27
Update your player
UPC - 609585163829
View all Philips SA2925R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
5 Update your player Your player is controlled by an internal program called the firmware. Newer versions of the firmware may have been released after you have purchased your player. A software program called Philips Device Manager checks for firmware updates that are available on the Internet. Install Philips Device Manager from your player or download the latest version from www.philips.com/support. 5.1 Manually verify software status Attention This procedure will erase the content of the player. 1 Copy the content of the player to the computer as a back-up. 2 Disconnect the player from the computer. 3 Turn off your player. 4 Ensure the computer is connected to the Internet. 5 Click Start > Programs > Philips Digital Audio Player > GoGear Spark > Philips GoGear Spark Device Manager to launch the Philips Device Manager. 6 On the player, hold the OPTIONS button while you connect the player to the computer. > The Device Manager enters recovery mode. 7 Click OK to continue. 8 When the display indicates that the process is finished, disconnect the player from the computer. > The display shows Updating firmware. 9 Wait until the update process is completed on the player. > The player restarts and is ready for use again. 10 Reconnect the player to the computer. 11 Transfer the back-up content to the player. 25