Philips SA4010 Quick start guide - Page 14

EN Troubleshooting How do I recover my player? In the event of a device error, please follow the following procedures: 1 Make sure the player is disconnected from PC and turned off. 2 Launch the Philips Device Manager at Start > Programs > Philips Device Manager > Philips Device Manager. 3 Press and hold )K. 4 Connect the player to the computer USB port. 5 Keep holding )K until the Philips Device Manager acknowledges your player and goes into recovery mode. 6 After the repair process is completed, click OK and disconnect your player. 7 The player is ready for use again after a restart. WARNING When the first time you connect the device to PC in recovery mode, a hardward wizard will be popped up to install the software. Please select "install the software automatically" and click Next, and then click Finish to complete the installation. During the installation, a warning message stating "The Software you are installing for this hardware has not passed Windows Logo testing." , please select "Continue Anyway", this installation will not affect your PC. How do I reset my player? In case the player does not react on any key press, did hang up or freeze up, please remove and insert the battery again. Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. 9