Philips SA4111 User manual - Page 11

ENGLISH 7 Technical data Power • Power supply: AAA alkaline battery* Display • Picture / Display: Mono display, 32 x 128 pixels, 7 colour LCD backlight Sound • Channel separation: 45dB • Equalizer settings: Rock / Jazz / Pop / Classical / Off • Frequency response: 30-18000Hz • Signal to noise ratio: > 85dB • Output Power (RMS): 2x3mW Audio Playback • Compression format: MP3 (8-320 kbps and VBR; Sample rate: 8, 11.025, 16, 22.050, 24, 32, 44.1, 48kHz), WAV, WMA (5-192kbps) • ID3-tag support: Song title and artist name Recording • Audio Capturing: Built-in microphone (Mono) Storage Media • Built-in memory capacity: SA410X 512MB NAND Flash + SA411X 1GB NAND Flash + SA412X 2GB NAND Flash + Connectivity • Headphone 3.5mm, USB 2.0++ Music transfer • Windows Media Player 10 System Requirements • Windows® XP (SP2 or above) • Pentium Class 300MHz processor or higher • 128MB RAM • 500MB hard disk space • Internet connection • Microsoft Internet Explorer 6.0 or later • Video display card • Sound card • USB port * Battery life vary by use and settings. + 1MB = 1 million bytes; available storage capacity will be less. 1GB = 1 billion bytes; available storage capacity will be less. Full memory capacity may not be available as some memory will be reserved for the player. Storage capacity based on 4 minutes per song and 64kbps WMA encoding. ++ Actual transfer speed may vary based on your operating system and software configuration. Technical data 9