Philips SBT75WHI User manual - Page 6
Get started
View all Philips SBT75WHI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3 Get started Caution •• Use of controls, adjustments, or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus.Write the numbers here: Model No Serial No Connect power Caution •• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back of the speaker. Connect the AC power adaptor(not supplied) to: • the power supply socket on the back of the speaker. • the wall power outlet. Built-in Battery The speaker can also operate on built-in rechargeable battery. To recharge the built-in battery: • Connect the speaker to the power supply. Note •• Use only the supplied USB cable to charge the battery. Turn on • Switch ON/OFF on the speaker to the ONposition. »» The Bluetooth indicator flashes (blue). Switch to standby mode The speaker switches to standby mode in the following situations. • In Bluetooth mode: no audio signal from your Bluetooth device over 15 minutes. • In MP3 link mode: no audio signal detected over 15 minutes. • The battery level is low. Note •• The Bluetooth connection will be terminated when the speaker enters standby mode, you can wake up the speaker by hold for 2 seconds. DC IN 5V . 1A EN 5