Philips SCD510 User manual - Page 16

16 English Question Answer The baby unit and the parent unit may be out of range of each other. Move the parent unit closer to the baby unit, but not closer than 3 feet/1 meter. If the LINK light on the parent unit still does not start to flash, use the reset function to reset the units to their default settings. Why does the LINK light on the parent unit flash red? The baby unit and the parent unit are out of range of each other. Move the parent unit closer to the baby unit. The baby unit may be switched off. Switch on the baby unit. Why does the battery light The non-rechargeable batteries of the baby unit are running low. on the baby unit flash red? Replace the non-rechargeable batteries or connect the baby unit to a power outlet (see chapter 'Preparing for use'). Why does the parent unit If the parent unit beeps while the LINK light flashes red, the beep? connection with the baby unit is lost. Move the parent unit closer to the baby unit. If the parent unit beeps and the battery light flashes red, the rechargeable battery pack of the parent unit is running low. Recharge the battery pack. The baby unit may be switched off. Switch on the baby unit. Why does the appliance produce a high-pitched noise? The units may be too close to each other. Make sure the parent unit and the baby unit are at least 3 feet/1 meter away from each other. The volume of the parent unit may be set too high. Decrease the volume of the parent unit. Why don't I hear a sound/ The volume of the parent unit may be set too low or may be Why can't I hear my baby switched off. Increase the volume of the parent unit. cr y? The microphone sensitivity level of the baby unit may be set too low. Increase the microphone sensitivity level with the SENSITIVITY button on the parent unit. The baby unit and the parent unit may be out of range of each other. Reduce the distance between the units. Why does the parent unit The baby unit also picks up other sounds than those of your react too quickly to other baby. Move the baby unit closer to the baby (but observe the sounds? minimum distance of 3 feet/1 meter). The microphone sensitivity level of the baby unit may be set too high. Decrease the microphone sensitivity level with the SENSITIVITY button on the parent unit. Why does the parent unit The microphone sensitivity level of the baby unit may be set too react slowly to the baby's low. Increase the microphone sensitivity level with the SENSITIVITY cr ying? button on the parent unit.