Philips SDV2720 User Manual - Page 4

Using your indoor, television antenna

Page 4 highlights

3.2 Connect to your TV 1 Connect one end of the coaxial cable to signal output of the antenna and the other end to the input on your TV receiver. 1 4 Using your indoor television antenna 4.1 For VHF/FM reception 1 Extend the telescoping dipoles to the longest possible length. 2 2 Turn your TV or FM radio to the desired channel/station. Adjust the dipoles by moving in different directions up and down, until reception is achieved. 3 3 Rotate the 12 position fine tuning control until the best reception is achieved. 4.2 For UHF reception 1 Turn your TV to the desired channel. 2 Position the UHF reflector until you obtain the best reception by rotating it side to side and up and down. 4 3 Rotate the 12 position fine tuning control until the best reception is achieved. D Note For best results you should point your antenna in the direction of the signal source. 1 TV ANT. 2 3 4  SDV2720_27_EN.indd 4 5/5/08 4:19:42 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

4
3.2
Connect to your TV
1
Connect one end of the coaxial cable to
signal output of the antenna and the other
end to the input on your TV receiver.
1
4
Using your indoor
television antenna
4.1
For VHF/FM reception
1
Extend the telescoping dipoles to the
longest possible length.
2
2
Turn your TV or FM radio to the desired
channel/station. Adjust the dipoles by
moving in different directions up and down,
until reception is achieved.
3
3
Rotate the 12 position fine tuning control
until the best reception is achieved.
4.2
For UHF reception
1
Turn your TV to the desired channel.
2
Position the UHF reflector until you obtain
the best reception by rotating it side to side
and up and down.
4
3
Rotate the 12 position fine tuning control
until the best reception is achieved.
D
Note
For best results you should point your antenna
in the direction of the signal source.
3
4
ANT.
TV
1
2
SDV2720_27_EN.indd
4
5/5/08
4:19:42 PM