Philips SDV2730 User Manual - Page 4
Using your indoor, television antenna
![]() |
View all Philips SDV2730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
3.2 Connect to your TV 1 Connect one end of the coaxial cable to signal output of the antenna and the other OUTPUT end to the input on your TV receiver. 1 2 Connect DC plug to the antenna and the power supply to a 120V AC outlet. 2 TV 1 ANT. 4 Using your indoor television antenna 2 6V 100mA 4.1 For VHF reception 1 Extend the telescoping dipoles to the longest possible length. 3 2 Turn your TV to the desired channel. Adjust the dipoles by moving in different directions 3 up and down, until reception is achieved. 3 3 Turn on the amplifier by rotating the gain control knob towards the max position until better reception is achieved. 4 D Note You may need to turn the gain control down to a lower setting for best reception. 4.2 For UHF reception 4 1 Turn your TV to the desired channel. 2 Position antenna toward transmitter until reception is achieved. 3 Turn on the amplifier by rotating the gain control knob towards the max position until MAX. MIN. reception is improved. D Note You may need to turn the gain control down to a lower setting for best reception. MAX. MIN. 5 MAX. MIN. E Tip This antenna can be placed on a vertical A and horizontal B orientation to extend -or- OUTPUT reception choices. 5 6V 100mA 6V 100mA OUTPUT A B 2730_27.indb 4 5/6/08 3:56:55 PM
![](/manual_guide/products/phillips-sdv273027-user-manual-f8f92c1/4.png)