Philips SDV2740 User Guide - Page 5

ENGLISH 7 4 Using your indoor television antenna 4.1 For VHF/FM reception 1 Extend the telescoping dipoles to the longest possible length. 6 2 Turn your TV to the desired channel. Adjust the dipoles by moving in different directions up and down, until reception is achieved. 7 3 Turn on the amplifier by rotating the gain control knob towards the max position until better reception is achieved. 8 D Note You may need to turn the gain control down to a lower setting for best reception. 8 MAX. MIN. 4.2 For UHF reception 1 Turn your TV to the desired channel. 2 Turn on the amplifier by rotating the gain control knob towards the max position until reception is improved. D Note You may need to turn the gain control down to a lower setting for best reception. 4.3 Setting up a digital tuner with this antenna Digital TV tuners require you to program the tuner with the available channels in your area. Generally this automatic process is part of the set-up of the tuner. However, if you do not have the antenna set up properly you may find that the tuner receives no viewable channels. E Tip If you have access to a rooftop antenna or This antenna can be placed on a horizontal another antenna which is currently connected orientation to extend reception choices. to a digital tuner you may use the antenna to program the tuner. The channels will be 6 memorized in the tuner - which will make aligning this antenna easier. Another method is to connect the antenna directly to your TV (not using the tuner) and tune to analog channels to find best location of the antenna, then re-connect the digital tuner - if you have adequate signal level you should be able to program the tuner. 2740_27.indb 5  5/8/08 2:43:21 PM