Philips SE6580B Quick start guide - Page 4

2. Register the handset. You must register your handset to the base station before you can use it. Place Handset on Base unit is displayed on the handset screen. The PIN is required before you can register or unregister handsets. By default, the PIN is 0000. Easy registration This type of registration is available when you wish to register your SE6580 on a SE650, SE655 or SE658 base station. For any other Philips base station, please refer to "Manual Registration" below. Moreover, the PIN code of the base station has to be the default one, that is 0000. If you have already changed it, please refer to base station user guide to reset it to default 0000 or refer to Manual Registration below. 1. Insert the unregistered handset into the base station to automatically begin registration. 2. Registering... is displayed on the screen. • Upon successful registration, a validation tone is emitted on the base (except for SE650) then on the handset, and the handset number (1 to 8) will be assigned by the base automatically. • If the easy registration fails, please refer to "Manual Registration" below. Manual registration 1. Power on the handset. 2. On the base station, press and hold handset locator a for 3 seconds. A beep sounds to indicate that the base station is ready to accept registration. (No beep sounds on the SE650.) Note If no action is taken on the handset within 90 seconds, the registration procedure will be aborted. If this happens, repeat from Step 1. 3. On the handset, press m, scroll n to Advanced Set and press o Select. 4. Scroll n to Register and press o Select. 5. Enter the PIN when prompted and press o OK to confirm. Registering... is displayed on the screen. • Upon successful registration, a validation tone is emitted and the handset number (1 to 8) is assigned by the base station automatically. Note This procedure is valid for Philips base stations. For other brands of base stations, please refer to base station user guide.