Philips SHB2505BK User manual - Page 6

3 Get started Charge the battery Note  Before you use your headset for the rst time, place the headsets in the charging case and charge the battery for 3 hours for optimum battery capacity and lifetime.  Use only the original USB charging cable to avoid any damage.  Finish your call before charging the headset, as connecting the headset for charging will power the headset o . Charging case Connect one end of the USB cable into the charging case, and another end into the power source. The charging case starts charging. • Charging process is veri ed by the blue LED light on the front panel, • When the charging case is fully charged, the blue light goes on. • Charging process is veri ed by white LED light on the earpieces. • When the headset is fully charged, the white light goes o . Tip  Normally, a full charge takes 2 hours (for the headset or charging case). Pair the headset with your Bluetooth device at the st time Make sure that the headset is fully charged. Take both headsets from the charging case, the headset will power on automatically, entering pairing model and Right & Left headset connected. Tip  The charging case serves as a portable backup battery for charging the headset. When the charging case is fully charged, it supports 3 full recharge cycle for the headset. Headset Place the headset in the charging case. The headset start charging. There will be a voice "Power on" and a voice "Pairing". Then, there will be a voice "Right channel" on right headset and "Left channel" on left headset after paring each other.