Philips SHB6017 Quick start guide - Page 2

Operate the headset, LED and sound indication, Welcome to Philips - pairing

Page 2 highlights

Operate the headset Turn headset on/off Play / Pause music Stop music Next / Previous track Adjust volume Pick up / End a call Reject a call Redial the last number Activate voice dialing* Mute/Unmute the Mic Transfer a call to a mobile phone Hold until LED turns on/off. Tap Hold Tap / Press VOL +/VOL Tap Hold Press twice quickly. Hold until beep occurs. Double tap during a call. Hold during a call. *Available if supported by your mobile phone. LED and sound indication The red/blue LED flashes alternately. The blue LED flashes once every 6 seconds. The blue LED flashes twice every 3 seconds. The blue LED flashes once every half a second. The blue LED flashes once every second. The red LED flashes three times and beeps twice every minute. Solid red LED. The LED is off. The headset beeps every 5 seconds. The headset is ready for pairing. The headset is connected to the device. The headset is not connected. There is an incoming/outgoing call. The headset is active on a call. The battery is low in power. The headset is charging. The headset is off./Charging is finished. The Mic is muted. Welcome to Philips! For an optimal experience, register your product at www.philips.com/welcome © 2011 Koninklijke Philips Electronics N.V. All rights reserved. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. V1.0

  • 1
  • 2

© 2011 Koninklijke Philips Electronics N.V. All rights reserved.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
V1.0
Turn headset on/off
Hold
until LED turns on/off.
Play / Pause music
Tap
Stop music
Hold
Next / Previous track
Tap
/
Adjust volume
Press
VOL +
/
VOL -
Pick up / End a call
Tap
Reject a call
Hold
Redial the last number
Press
twice quickly.
Activate voice dialing*
Hold
until beep occurs.
Mute/Unmute the Mic
Double tap
during a call.
Transfer a call to a mobile phone
Hold
during a call.
Operate the headset
*
Available if supported by your mobile phone.
The red/blue LED flashes alternately.
The headset is ready for pairing.
The blue LED flashes once every 6
seconds.
The headset is connected to the device.
The blue LED flashes twice every 3
seconds.
The headset is not connected.
The blue LED flashes once every half a
second.
There is an incoming/outgoing call.
The blue LED flashes once every second.
The headset is active on a call.
The red LED flashes three times and
beeps twice every minute.
The battery is low in power.
Solid red LED.
The headset is charging.
The LED is off.
The headset is off./Charging is finished.
The headset beeps every 5 seconds.
The Mic is muted.
LED and sound indication
Welcome to Philips!
For an opti
m
al experience, register your product at
www.philips.com/welcome