Philips SLA5500NS User manual - Page 30
Activating a New Profile on the SLA5500 using Remote, Control, Editing the Device Name, Performing
View all Philips SLA5500NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
EN 30 Activating a New Profile on the SLA5500 using Remote Control A 'default' network profile is loaded automatically when you first install the SLA5500. However, you may wish to activate an alternative network profile that you have created using the Configuration Wizard or the Philips Wireless Music Receiver PC Utility. Follow these steps to activate a different network profile: 1 Press SYSTEM (6) on the remote control to display the Configuration menu. 2 Press 4 until 'Select Profile' is highlighted. Press 2. 3 A list of available profiles is displayed. The currently active profile is denoted by an asterisk [*]. 4 Press 4 to highlight the desired profile. Press 2. 5 The message 'Selected Profile N...Applying Settings' will be displayed. After a few seconds, the SLA5500 will restart. The device is now ready to operate using the new profile. Note: This function can also be performed using the Philips Wireless Music Receiver PC Utility - see 'Activating a Different Network Profile'. Editing the Device Name Your SLA5500 is given the default device name Philips SLA5500 during initial installation. Follow these steps to change the device name of your SLA5500: 1 Press SYSTEM (6) on the remote control to display 'Configuration'. 2 Press 4 until 'Advanced Settings' is highlighted. Press 2. 3 Press 4 until 'Edit Device Name' is highlighted. Press 2. 4 Press 4 until 'Change' is highlighted. Press 2. 5 Edit the name of your SLA5500 device (see 'Entering Text in Edit Mode'). Example: My SLA5500 6 Press 2 to complete the change. Performing a Hard Reset to Factory Settings Under normal circumstances, you should reset the SLA5500 to its factory settings by activating the Factory Default profile using the Philips Wireless Music Receiver PC Utility (see 'Activating a Different Network Profile'). However, should this not be possible for some reason, you can perform a hard reset on the SLA5500 device itself, as follows: 1 Ensure that the SLA5500 is turned on. 2 Insert a paperclip into the small reset hole and hold the reset button down for 2 seconds. 3 Remove the paperclip and wait until the SLA5500 restarts.