Home » Philips Manuals » Coffee Makers & Espresso Machines » Philips SM7685 » Manual Viewer

Philips SM7685 User manual - Page 21

Meaning of error codes - 04

Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

The brew group is not inserted or is not inserted correctly. Insert the brew group and make sure that it locks into place. The coffee grounds container is full. Make sure that the machine is switched on. Then remove and empty the coffee ground container. The machine needs to fill the water circuit with water. Make sure there is water in the water tank and press the start/stop button to start. English 21 The internal cappuccinatore is not inserted or is not inserted correctly and/or the spout door is open. Make sure that the holes in the cappuccinatore are aligned with the tubes in the machine before you push the internal cappuccinatore upwards into place. Then close the spout door. The coffee grounds container is not in place. Place back the coffee grounds container. Meaning of error codes Below you find a list of the error codes showing problems that you can solve yourself. Video instructions are available on www.saeco.com/care. If another error code appears, please contact the Philips Consumer Care Center in your country. For contact details, see the warranty leaflet. Error code Problem Possible solution 01 The coffee funnel is Switch off the machine and unplug it. Remove the brew clogged. group. Then open the lid of the pre-ground coffee compartment and insert the spoon handle. Move the handle up and down until the clogged ground coffee falls down (Fig. 31). Visit www.saeco.com/care for detailed video instructions. 03 The brew group is Switch off the machine with the main switch. Rinse the dirty or not well- brew group with fresh water, let it air-dry and then greased. lubricate it. Consult chapter 'Cleaning the brew group' or visit www.saeco.com/care for detailed video instructions. Then switch the machine on again. 04 The brew group is not Switch off the machine with the main switch. Remove the positioned correctly. brew group and reinsert it. Make sure that the brew group is in the correct position before you insert it. Consult chapter 'Handling the brew group or visit www.saeco.com/care for detailed video instructions. Then switch the machine on again.

Section	Page
Contents	6
IMPORTANT SAFEGUARDS	6
SAVE THESE INSTRUCTIONS	7
CAUTION	7
Instructions for the power supply cord	7
Important safety information	7
Warning	8
General	8
Caution	8
General	8
Cappuccinatore and milk container	9
Warning	9
Caution	10
Electromagnetic fields (EMF)	10
Introduction	10
Machine overview (Fig. 1)	11
First installation	11
Using the control panel and touchscreen	12
AquaClean filter	12
Preparing the AquaClean filter for activation	12
Activating the AquaClean filter	13
1. Activating the AquaClean filter during first installation	13
2. Activating the AquaClean filter when prompted	13
3. Activating the AquaClean filter at any other time	13
Measuring water hardness	13
Brewing drinks	13
Brewing coffee drinks	14
Brewing milk-based drinks	14
Brewing coffee with pre-ground coffee	14
Dispensing hot water	14
Personalizing drinks and creating profiles	15
Personalizing your drinks	15
Creating a profile	15
Removing a profile	15
Adjusting machine settings	15
Adjusting default settings	16
Handling the brew group	16
Removing the brew group from the machine	16
Reinserting the brew group	16
Cleaning and maintenance	17
Cleaning table	17
Cleaning the brew group	18
Cleaning the brew group under the tap	18
Cleaning the brew group with the coffee oil remover tablets	18
Lubricating the brew group	18
Cleaning programs for the internal cappuccinatore	19
Cleaning the internal cappuccinatore under the tap	19
Descaling procedure	19
What to do if the descaling procedure is interrupted	20
Warning icons and error codes	20
Meaning of the warning icons	20
Meaning of error codes	21
Ordering accessories	22
Troubleshooting	22
Beverage types and lengths	27
Beverage types	27
Beverage lengths	27
Technical specifications	28
Disposal	28
Warranty and support	29
Table des matières	30
MISES EN GARDE IMPORTANTES	30
CONSERVEZ CES INSTRUCTIONS	31
AVERTISSEMENT	31
Directives pour le cordon d’alimentation	31
Renseignements importants sur la sécurité	32
Avertissement	32
Généralités	32
Attention	33
Généralités	33
Cappuccinatore et récipient à lait	34
Avertissement	34
Attention	34
Champs électromagnétiques (CEM)	34
Introduction	35
Vue d’ensemble de la machine (fig. 1)	35
Première installation	36
Utilisation du panneau de commande et de l’écran tactile	36
Filtre AquaClean	37
Préparation du filtre AquaClean avant son activation	37
Activation du filtre AquaClean	37
1. Activation du filtre AquaClean lors de la première installation	37
2. Activation du filtre AquaClean au moment demandé	37
3. Activation du filtre AquaClean à tout autre moment	37
Mesure de la dureté de l’eau	38
Infusion de boissons	38
Infusion de boissons au café	38
Infusion de boissons à base de lait	38
Infuser du café avec du café prémoulu	39
Distribution d’eau chaude	39
Personnalisation de boissons et création de profils	39
Personnalisez vos boissons	40
Créer un profil	40
Supprimer un profil	40
Réglage des paramètres de la machine	40
Réglage des paramètres par défaut	41
Manipulation du groupe de percolation	41
Retrait du groupe de percolation de la machine	41
Réinsersion du groupe de percolation	41
Nettoyage et entretien	42
Tableau relatif au nettoyage	42
Nettoyage du groupe de percolation	43
Nettoyage du groupe de percolation sous le robinet	43
Nettoyage du groupe de percolation avec les pastilles dégraissantes	44
Lubrification du groupe de percolation	44
Programmes de nettoyage pour le cappuccinatore interne	44
Nettoyage du cappuccinatore interne sous le robinet	45
Procédure de détartrage	45
Que faire si la procédure de détartrage est interrompue	45
Icônes d’avertissement et codes d’erreur	46
Signification des icônes d’avertissement	46
Signification des codes d’erreur	47
Commande d'accessoires	48
Résolution des problèmes	48
Longueurs et types de boisson	53
Types de boisson	53
Longueurs de boisson	54
Caractéristiques techniques	54
Mise au rebut	55
Garantie et support	55
內容	56
重要防護措施	56
重要防護措施	56
請保存使用說明	57
警告：	57
警告	57
電源線的指示	57
重要安全資訊	57
警示	57
一般	57
警告	58
一般	58
卡布奇諾機及牛奶容器	58
警示	58
警告	59
電磁波 (EMF)	59
簡介	59
咖啡機概觀 (圖 1)	59
首次安裝	60
使用控制面板與觸摸屏	60
AquaClean 濾水器	61
準備 AquaClean 濾水器，以便啟動	61
啟動 AquaClean 濾水器	61
1. 首次安裝時啟動 AquaClean 過濾器	61
2. 出現提示時啟動 AquaClean 濾水器	61
3. 在任何其他時間啟動 AquaClean 濾水器	61
測試水質硬度	61
沖煮飲品	62
沖煮咖啡飲品	62
沖煮奶類飲品	62
以預磨咖啡粉沖煮咖啡	62
提供熱水	62
客製化飲品，建立個人設定	62
個人化您的飲品	63
創建個人資料	63
刪除個人設定	63
調整咖啡機的設定	63
調整預設設定	63
處理沖煮組件	64
從咖啡機中取出沖煮器	64
重新插入沖煮組件	64
清潔與維護	64
清潔與保養表	64
清洗沖煮組件	65
在水龍頭下清潔沖煮組件	65
使用咖啡去油汙錠清潔沖煮組件	65
潤滑沖煮組件	65
內置式自動奶泡器的清潔程序	66
在水龍頭下沖洗內置式自動奶泡器	66
除鈣程序	66
若除鈣程序中斷該怎麼做	66
警示圖示與錯誤碼	67
警示圖示的意義	67
錯誤碼的意義	67
訂購配件	68
疑難排解	68
飲品類型與份量	71
飲品類型	71
飲品份量	71
技術規格	72
處理方式	72

Match case Limit results 1 per page

The brew group is not inserted

or is not inserted correctly. Insert

the brew group and make sure

that it locks into place.

The internal cappuccinatore is not

inserted or is not inserted

correctly and/or the spout door is

open. Make sure that the holes in

the cappuccinatore are aligned

with the tubes in the machine

before you push the internal

cappuccinatore upwards into

place. Then close the spout door.

The coffee grounds container is

full. Make sure that the machine

switched on

. Then remove

and empty the coffee ground

container.

The coffee grounds container is

not in place. Place back the

coffee grounds container.

The machine needs to fill the

water circuit with water. Make

sure there is water in the water

tank and press the start/stop

button to start.

Meaning of error codes

Below you find a list of the error codes showing problems that you can solve yourself. Video

instructions are available on

www.saeco.com/care

. If another error code appears, please

contact the Philips Consumer Care Center in your country. For contact details, see the

warranty leaflet.

Error

code

Problem

Possible solution

The coffee funnel is

clogged.

Switch off the machine and unplug it. Remove the brew

group. Then open the lid of the pre-ground coffee

compartment and insert the spoon handle. Move the

handle up and down until the clogged ground coffee falls

down (Fig. 31). Visit

www.saeco.com/care

for detailed

video instructions.

The brew group is

dirty or not well-

greased.

Switch off the machine with the main switch. Rinse the

brew group with fresh water, let it air-dry and then

lubricate it. Consult chapter 'Cleaning the brew group' or

visit

www.saeco.com/care

for detailed video instructions.

Then switch the machine on again.

The brew group is not

positioned correctly.

Switch off the machine with the main switch. Remove the

brew group and reinsert it. Make sure that the brew group

is in the correct position before you insert it. Consult

chapter 'Handling the brew group or visit

www.saeco.com/care

for detailed video instructions.

Then switch the machine on again.

English