Philips SPC610NC User manual - Page 10

EN Installation Putting the camera into operation mode 1 Bend the camera neck into the desired position. 1x click 2x click 2 Switch on the camera ( ) by sliding the lens cover (light switch) one click downwards ( ). > The camera is now in operation mode but will only function when the applications are started up. See chapter 'Using the applications'. • If desired you can switch on the front light / keyboard light ( ) by sliding the light switch (lens cover) one more click downwards ( ). To switch off the front light / keyboard light ( ), slide the light switch (lens cover) one click upward. Notes! - When using the camera be sure to slide the lens cover (light switch) at least one click downwards ( ). - When the camera is not in use, be sure to slide the lens cover (light switch) all the way up (two clicks) to protect the lens. 10