Philips SRP2003 User manual - Page 9

English Using the universal remote control 4 Press and hold the key that does not function and immediately release it when the device responds. • If the key still does not function as expected, try pressing it again for a longer period of time. 5 Press the device selection key twice to save your settings and exit setup mode. • W  hen no key 2 x is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings. 3 Using the universal remote control 3.1 Keys and functions The illustration on page 2 gives an overview of all keys on the remote control.Try out the keys you need for operating your devices. Notes • Keys having the same functions as the keys on your original remote control may have different namings on the SRP2003 (e.g. Info / Display). • Only functions that are available on your original remote control can be used for operating your devices with the SRP2003. 1 Setup light. • lights up red when the remote control is in setup mode. • lights up red when a remote control command is being sent. 2 selects available source inputs (antenna, cable, etc.). 3 device selection keys. Select the device to be operated. EN 9 P2003_27__Manual_80_210.indd 9 25-09-09 11:0