Philips T2 User manual - Page 7

3 Get started Charge the battery Note  Before you use your headphones, charge the battery for 2 hours for optimum battery capacity and lifetime.  Use only the original USB-C charging cable to avoid any damage.  Finish your call before charging. • The earpieces start charging and the blue LED light goes on • When the earpieces are fully charged, the blue light will go off Tip  Normally, a full charge takes 2 hours (for the earpieces or charging box) by USB cable. Charging Box Plug one end of the USB-C cable into the charging box and the other end into the power source. Tip  The charging box serves as a portable backup battery for charging the earpieces. When the charging box is fully charged, it will fully recharge the earpieces 3 times. Earpieces Place the earpieces in the charging box. Wireless charging The charging box has a built-in wireless charging coil. You can charge the battery by using a wireless charger or another device that functions as a wireless charger. Caution Precautions for wireless charging  Do not place the charging box on the wireless charger when conductive materials, such as metal objects and magnets, are placed between the charging box and the wireless charger.  Keep the charging box away from high temperatures and water sources. The box may get warm during charging, this is normal. Charging the battery with a wireless charger. • Place the earpieces in the charging box • Close the charging box cover • Place the charging box on the center of the wireless charger • When fully charged, remove the charging box from the wireless charger 6 EN