Philips TASH402LF User manual - Page 5

3 Get started Charge the battery Note  Before you use your headset for the rst time, charge the battery for 5 hours for optimum battery capacity and lifetime.  Use only the original USB charging cable to avoid any damage.  Finish your call before charging the headphones, as connecting the headphones o .  You can operate the headphones normally during charging. Connect the supplied USB charging cable to: • the micro USB charging slot on the headphones and; • the charger/USB port of a computer. LED turns white during charging and turns o when the headphones is fully charged Tip  Normally,a full charge takes 2 hours. Pair the headphones with your mobile phone Before you use the headphones with your mobile phone for the rst time, pair it with a mobile phone. A successful pairing establishes a unique encrypted link between the headphones and mobile phone. The headphones store the last 8 devices in the memory. if you try to pair more than 8 devices,the 4 EN earliest paired device is replaced by the new one. 1 Make sure that the heaphones are fully charged. 2 Press and hold for 2 seconds to turn the headphones on. 3 Make sure that the mobile phone is turned on and its Bluetooth feature is activated. 4 Pair the headphones with the mobile phone. For detailed information. refer to the user manual of your mobile phone. The following example shows you how to pair the headphones with your mobile phone. 1 Activate the Bluetooth feature of your mobile phone, select Philips SH402. 2 Enter the headset password"0000" (4 zeros) if prompted. For those mobile phones featuring Bluetooth 3.0 or higher, no need to enter a password. Philips SH402