Philips TSU6000 Quick start guide - Page 52
To assign an IR code from the IR database, To assign an IR code by learning - prontopro remote control
View all Philips TSU6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
ProntoProEdit 3.0 - User Manual Configuring a CCF To assign an IR code from the IR database 1 Select the device for which you want to set the IR codes from the Device drop-down list. 2 Select the brand of the device from the Brand drop-down list. Note You can also select Non Applicable from the Brand drop-down list. This allows you to create buttons and assign an IR code for a function that is not available for your current brand. This function can be used later on when you change the brand for a new device. For some brands the IR codes are divided into different code sets. 3 Select, if necessary, the appropriate set from the Code Set dropdown list. 4 Select which function has to be performed from the Functions list. The IR codes for the functions are stored in the database. By selecting the function from the list you program the command from the button, hard key, device or macro group. 5 Click View IR to display the IR code associated with the selected function. The IR code text box expands at the bottom of the window. The button changes into Hide IR. 6 Connect your ProntoPro to your computer as described in "Uploading a CCF from Your ProntoPro" on page 15 and click Test IR. You can try out the selected function on your ProntoPro. 7 Click OK in the 'Add IR' window. The IR code is added to the action list of the selected button. 8 Click OK to accept the properties. -orClick Cancel to return without changing the properties. To assign an IR code by learning it 1 Plug one end of the ProntoPro serial cable in the serial port on your ProntoPro. 2 Plug the other end of the ProntoPro serial cable in the serial port on your computer. 3 Point the device's original remote control to the ProntoPro's learning eye. Please refer to the ProntoPro Owner's Manual for more information on learning commands. 4 Click Learn IR. The 'Learn IR code' window appears with the following message: "Waiting for ProntoPro to learn IR code". 5 Press and hold the corresponding button on your device's remote control. One of the following messages appears: Learning completed successfully. The learned code has been added in the list of actions. Click OK to assign the code to the selected button and to close the 'Button Properties' window. Learning failed (timeout). ProntoProEdit successfully connected to your ProntoPro, but somehow couldn't learn the code. Try again. Please refer to the ProntoPro Owner's Manual for troubleshooting about learning commands. ProntoPro not connected or not responding. ProntoProEdit cannot connect to your ProntoPro. Click Details to open a window listing all the serial ports on your PC. Philips Page 52 of 76