Philips VR601BMG99 User manual - Page 9
Hookups With a Cable Box/Direct Broadcast System cont'd
View all Philips VR601BMG99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Hookups With a Cable Box/Direct Broadcast System (cont'd) 9 With this connection: q You may watch one channel while recording another. q You may not record scrambled channels. 1 VCR Cable Signal AUDIO L OUT IN R ANT IN VIDEO OUT CH3 CH4 OUT IN 2 Cable Box/DBS IN RF coaxial cable OUT RF coaxial cable Connections 1 Connect a Cable signal to the VCR's ANT(enna) IN Jack. 2 Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS. 3 Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV. 75 CAANBTLE/ 3 TV's ANTENNA IN Jack Recording One Channel/Watching Another 1 Put the Cable Box/DBS on the same channel as the VCR's CH3/CH4 switch. Set the TV to the Cable Box/DBS output channel (03 or 04). Then, with the VCR in VCR position (the VCR/TV light will appear on the display panel), use the CHANNEL o/p buttons to select the channel you want to record at the VCR. Start the recording. 2 Press the VCR/TV button once to put the VCR in TV position. (The VCR/TV light will disappear.) 3 Select the channel you want to watch at the Cable Box/DBS. Helpful Hint • When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04).