Philips VRKD11YL User manual - Page 9

Hookups With a Cable Box/Direct Broadcast System (cont'd) 9 With this connection: q You may watch one channel while recording another. q You may not record scrambled channels. 1 VCR Cable Signal AUDIO ANT IN OUT IN OUT VIDEO CH3 CH4 2 Cable Box/DBS IN OUT RF coaxial cable RF coaxial cable Connections 1 Connect a Cable signal to the VCR's ANT(enna) IN Jack. 2 Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS. 3 Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV. CA7AN5BT⍀LE/ 3 TV's ANTENNA IN Jack Recording One Channel/Watching Another 1 Put the Cable Box/DBS on the same channel as the VCR's CH3/CH4 switch. (Make sure the TV is on the Cable Box/DBS output channel, 03 or 04.) Then, with the VCR in VCR position (the VCR/TV light will appear on the front of the VCR), use the CHANNEL o/p button to select the channel you want to record at the VCR. Start the recording. 2 Press the VCR/TV button once so that the VCR/TV light appears. 3 Select the channel you want to watch at the Cable Box/DBS. Helpful Hint • When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04).