Philips WACS700 User manual - Page 24

English Installation Preparation If there is interference in the neighborhood, the set may pause during playback or respond slowly to your operation. In such cases - Keep the Center or Station at least 3 meters away from microwave ovens, DECT phones, bluetooth devices (e.g. headphones, a computer mouse), wireless access points (e.g. routers), cordless phones, Wi-Fi compatible printers and PDAs, etc.. - Use the WEP* key when connecting your Center and Station to an existing wireless PC network. see the Owner's manual of your router and the manual Connect to your PC: Option 2. - Change the operating channel of your Center and Station when connecting them to an existing wireless PC network.To learn about how to change channels, see the manual Connect to your PC: Option 2. - If possible, change the operating channels of the other Wi-Fi devices at your home. - Turn the above devices in different directions to minimize interference. * stands for Wired Equivalent Privacy. It is a security protocol for wireless local area network Using Center's remote control Battery usage: As a remote control with synchronous display, Center's remote control consumes more power than normal remote controls. When its batteries are low or empty, the icon appears on the remote control's display. Replace the batteries with new alkaline batteries. By default, Center's remote control works with Center only. To operate Station using Center's remote control, 1 Press and hold REFRESH until the select screen appears on the display of Center's remote control 2 Press the navigation controls 3 or 4 and 2 to select Station Using the remote control WACS700 are equipped with two remote controls, one for Center and the other for Station. By using either of the remote controls, you can operate both Center and Station. IMPORTANT! - Remove the protective plastic tab before using the Station's remote control. - Always point the remote control directly towards IR area on the Center or Station you wish to operate. - Some functional keys on Center's remote control are exclusively used for Center (for example, CD/MP3-CD, MARK/UNMARK, MUSIC BROADCAST etc.) 24 On Center's remote control: ➜ Display shows current status of Station after Station is connected ➜ You can use Center's remote control to operate Station now Helpful hints: - To operate Center using the remote control again, repeat the above steps 1-2 to select Center. - Center's remote control will return to its default setting (works with Center only) when you insert new batteries into it. Using the display on the Center's remote control You can synchronize the status of your Center or Station onto the display of Center's 2-way remote control. With the synchronized display, your operation of remote control becomes quicker and easier.