Philips WACS7500 User manual - Page 80
Connect to two different home networks, View connection status, View Station, status in Wi-Fi
UPC - 609585143807
View all Philips WACS7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
11.4 Connect to two different home networks WACS7500 can be added into two different home networks via wired and wireless network ports. Note that the IP addresses of the two different network ports cannot be in one subnet:WACS7500 has no router function and cannot determine which port to use. Note Once is added to the Wi-Fi network, all Wi-Fi ad-hoc connections with the WAC7500 will be shut down. Applicable if you have two home networks. Once a is added to the Wi-Fi (wireless) home network, the Wi-Fi wireless connection of this particular to the will be shut down. However may still maintain its Wi-Fi ad-hoc connection with one or more other . WACS7500 cannot shadow the IP of a network device that is not activated. Please be careful of the IP address settings to avoid IP address conflict between the wired and Wi-Fi ports. 11.5 View connection status 11.5.1 View Station ( ) status in Wi-Fi network of Center ( ) 1 Check that is in HD source. 2 Press MENU to enter the menu screen. 3 Use 3 or 4 and 2 to enter Station Management (Mgnt) menu. 4 Use 3 or 4 and 2 to select Station Status. > A list of connected or previously connected is displayed on the . 5 Press 2 to view the connection information. 76 Network settings