Philips XL3401B User manual - Page 19

2 Enter 51. Press and hold until you see BASE?. 3 Select the base using the digit keys (1, 2, 3 or 4). Press and hold until you see SEARCHING... 4 Press and hold on the base unit for 3 seconds. • The base will turn on the LED for 30 seconds. • If registration is successful, handset will show REGISTERED. Note If registration was not successful, the handset will show FAILED. Repeat the above procedures and try again. 6.3.2 Select a base If your handset is registered to more than 1 base, you can select which base the handset will use. You can choose a fixed base or you can allow the handset to automatically search for a nearby available base (AUTO base selection). In standby mode: 1 Press and hold until you see MENU?. 2 Enter the base index number (see below). 3 Press and hold to confirm. • If successful, handset will show the selected base. Otherwise, handset will show FAILED. Base selection BASE 1 BASE 2 BASE 3 BASE 4 AUTO Index Number 64 65 66 67 68 6.3.3 Un-register a handset A handset can un-register another handset registered to the same base station. It cannot unregister itself. In standby mode: 1 Press and hold until you see MENU?. 2 Enter 52. Press and hold until you see HANDSET?. 3 Enter the number of the handset you want to unregister. Press and hold to confirm. • If un-registration is successful, your handset will show DELETED. 6.3.4 Reset your phone You can reset your phone to factory settings. To find out what settings are being reset, see page 20. In standby mode: 1 Press and hold until you see MENU?. 2 Enter 01 if you want to delete all the memories during the reset. OR 2 Enter 02 if you want to keep the memories unchanged during the reset. 3 Press and hold until you see PROCESSING.... 6.3.5 Select flash duration This option is helpful when using operator services. The default value of flash duration that is preset in your XL340 should be the best suited for your country network and therefore you should not need to change it. In standby mode: 1 Press and hold until you see MENU?. 2 Enter the flash duration index number (see below). 3 Press and hold until you see the new setting is displayed. Flash duration FLASH 1 FLASH 2 FLASH 3 FLASH 4 FLASH 5 FLASH 6 FLASH 7 Index Number 71 72 73 74 75 76 77 Use more of your phone 17