Pioneer 917V-K Owner's Manual - Page 21

Connecting up, AC outlet - subwoofer

Page 21 highlights

English Deutsch Français Italiano Nederlands Español Connecting up 03 Overhead view of speaker setup You can also refer to the 3-D speaker setup illustration on page 7. Front left Center Front right Surround left Subwoofer Surround right Listening position AC outlet Power supplied through this outlet is turned on and off by the receiver's power switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A). • This unit should be disconnected by removing the power plug from the wall socket when not in regular use (ex. when on vacation). AC OUTLET AC 120 V 60 Hz SWITCHED 100 W MAX 0.8 A MAX Surround back left Surround back right Single surround back speaker . The diagrams below show suggested surround and surround back speaker orientation. The first diagram (fig. A) shows orientation with one surround back speaker (or none) connected. The second (fig. B) shows orientation with two surround back speakers connected. 90~120 LS RS LS RS LS SB fig. A 0~60 RS SBL SBL SBR SBR fig. B 3-D view of 7.1 channel speaker setup Caution • Do not connect a TV set, monitor, heater, or similar appliance to this unit's AC outlet. • Do not connect appliances with high power consumption to the AC outlet in order to avoid overheating and fire risk. This can also cause the receiver to malfunction. • Since a subwoofer or power amplifier can exceed the 100 W maximum when playing sources at a high volume, this type of equipment should not be connected to the AC outlet. 21 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

Connecting up
03
21
En
English
Français
Deutsch
Nederlands
Italiano
Español
Overhead view of speaker setup
You can also refer to the 3-D speaker setup
illustration on page 7.
.
The diagrams below show suggested surround
and surround back speaker orientation. The
first diagram (
fig. A
) shows orientation with one
surround back speaker (or none) connected.
The second (
fig. B
) shows orientation with two
surround back speakers connected.
3-D view of
7.1 channel
speaker setup
AC outlet
Power supplied through this outlet is turned
on and off by the receiver's power switch. Total
electrical power consumption of connected
equipment should not exceed 100 W (0.8 A).
This unit should be disconnected by
removing the power plug from the wall
socket when not in regular use (ex. when
on vacation).
Caution
Do not connect a TV set
, monitor, heater, or
similar appliance to this unit's AC outlet.
Do not connect appliances with high
power consumption to the AC outlet in
order to avoid overheating and fire risk.
This can also cause the receiver to
malfunction.
Since a subwoofer or power amplifier can
exceed the 100 W maximum when playing
sources at a high volume, this type of
equipment should not be connected to the
AC outlet.
Surround
left
Surround
right
Listening position
Front
left
Front
right
Center
Subwoofer
Surround back
Surround back
Single surround back speaker
left
right
90~120
fig. A
fig. B
LS
LS
RS
RS
SB
LS
RS
0~60
SBL
SBL
SBR
SBR
AC OUTLET
AC 120 V
60 Hz
SWITCHED 100 W MAX
0.8 A MAX