Pioneer AVH-221EX Installation Manual - Page 7

5 cm Leave ample space 5 cm Installation using the screw holes on the side of this product 1 Fastening this product to the factory radio-mounting bracket. Position this product so that its screw holes are aligned with the screw holes of the bracket, and tighten the screws at three locations on each side. Use either the truss head screws (5 mm × 9 mm) or flush surface screws (5 mm × 9 mm), depending on the shape of the bracket's screw holes. Factory radio-mounting bracket If the pawl interferes with installation, you may bend it down out of the way. Dashboard or console Truss head screw or flush surface screw Be sure to use the screws supplied with this product. Installing the microphone • Install the microphone in a place where its direction and distance from the driver make it easiest to pick up the driver's voice. • Be sure to turn off (ACC OFF) the product before connecting the microphone. • Depending on the vehicle model, the microphone cable length may be too short when you mount the microphone on the sun visor. In such cases, install the microphone on the steering column. The microphone is mounted on the sun visor. The microphone is mounted on the steering column. Use separately sold clamps to secure the lead where necessary inside the vehicle. For installation, contact your dealer or an authorized Pioneer Service Station for assistance. En 7 English