Pioneer AVH-P3300BT Owner's Manual - Page 59
Menu operations - microphone
UPC - 884938123341
View all Pioneer AVH-P3300BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Menu operations Section 15 Menu operations 2 Touch Graphic EQ on the audio function menu. 3 Touch c or d to select the desired item. Powerful-Natural-Vocal-Custom1- Custom2-Flat-Super Bass 4 Touch the Equalizer band to adjust. 5 Touch a or b to adjust the level of the equalizer band. Range: +12dB to -12dB # You can then select another band and adjust the level. Adjusting loudness Loudness compensates for deficiencies in the low- and high-frequency ranges at low volume. 1 Display the audio function menu. Refer to Introduction of menu operations on page 57. 2 Touch Loudness on the audio function menu. 3 Touch c or d to select a desired level. Off (off)-Low (low)-Mid (mid)-High (high) Using the auto-equalizer The auto-equalizer is an equalizer curve created by auto EQ (refer to Auto EQ (auto-equalizing) on page 67). You can turn the auto-equalizer on or off. If you connect an optional microphone to this unit, you can use this function. 1 Display the audio function menu. Refer to Introduction of menu operations on page 57. 2 Touch Auto EQ to turn the auto-equalizer on or off. # You cannot use this function if auto EQ has not been carried out. Using sonic center control Sound that is suited for the listening position can easily be created with this function. 1 Display the audio function menu. Refer to Introduction of menu operations on page 57. 2 Touch Sonic Center Control on the audio function menu. 3 Touch c or d to select a listening position. Range: Left:7 to Right:7 Using subwoofer output This unit is equipped with a subwoofer output which can be turned on or off. ! The cut-off frequency and output level can be adjusted when the subwoofer output is on. 1 Display the audio function menu. Refer to Introduction of menu operations on page 57. 2 Touch Subwoofer on the audio function menu. 3 Touch On or Off next to Subwoofer to turn the subwoofer output on or off. 4 Touch Normal or Reverse next to Phase to select the phase of subwoofer output. 5 Touch c or d next to Level to adjust the output level of the subwoofer. Range: +6 to -24 6 Touch c or d next to Frequency to select the cut-off frequency. 50Hz-63Hz-80Hz-100Hz-125Hz Only frequencies lower than those in the selected range are outputted from the subwoofer. En 59