Pioneer AVH-P5100DVD Installation Manual - Page 15
DIN Front-mount - trim ring
UPC - 012562944401
View all Pioneer AVH-P5100DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English Español Before installing the unit • Remove the trim ring and the mounting sleeve. Extend top and bottom of the trim ring outwards to remove the trim ring. And then loosen the screws (2 mm × 3 mm) to remove the mounting sleeve. • When reattaching the trim ring, push the trim ring onto the unit until it clicks after reattaching the mounting sleeve. (If the trim ring is attached upside down, the trim ring will not fit properly.) DIN Front-mount 1. Decide the position of the side brackets. • When installing in a shallow space, change the position of side brackets (small). In this case, stick concealing tape on parts that protrude from the dashboard. Mounting sleeve Screw (2 mm × 3 mm) Trim ring Concealing tape Side bracket (small) Flush surface screw (5 mm × 6 mm) • If you prefer an off-set installation in which the front panel is pushed further back, when there is a space available at the back of the unit, use the side brackets (large). Deutsch Français Italiano Nederlands PyÒÒÍËÈ Side bracket (large) Flush surface screw (5 mm × 6 mm) 14