Pioneer AVH-X2500BT Owner's Manual - Page 51

English Additional information Additional information Appendix Troubleshooting Common Symptom Cause Action (Reference page) The power will not turn on. The unit will not operate. Leads and connectors are incorrectly connected. Confirm once more that all connections are correct. The fuse is blown. Rectify the cause and then replace the fuse. Be sure to install a fuse with the same rating. Noise and/or Press RESET. other factors (Page 44) are causing the built-in microprocessor to operate incorrectly. Operation with the remote control is not possible. The unit does not operate correctly even when the appropriate remote control buttons are pressed. Battery power is low. Some operations are prohibited with certain discs. Load a new battery. Try operating with another disc. Symptom Cause Action (Reference page) Playback is not possible. The disc is dirty. Clean the disc. The type of disc loaded cannot be played on this unit. Check the disc type. The disc loaded is not compatible with this video system. Change the disc to one that is compatible with your video system. There is no sound. The volume level will not rise. Cables are not connected correctly. The unit is performing still, slow motion or frame-by-frame playback. Connect the cables correctly. There is no sound during still, slow motion or frameby-frame playback. There is no image displayed. The parking brake cable is not connected. Connect the parking brake cable, and apply the parking brake. The parking brake is not applied. Connect the parking brake cable, and apply the parking brake. The icon is displayed, and operation is not possible. The operation is prohibited for the disc. The operation is not compatible with the configuration of the disc. This operation is not possible. This operation is not possible. Symptom Cause Action (Reference page) The image displayed stops (pauses) and the unit cannot be operated. The data could no longer be read during playback. Stop playback once, and start playback again. There is no sound. The volume level is low. The volume level is low. The attenuator is on. Adjust the volume level. Turn the attenuator off. The sound and video skip. The unit is not firmly secured. File size and transmission rate are above recommended rates. Firmly secure the unit. Create a DivX file that is within the recommended size and transmission rate. The aspect ratio is incorrect and the image is stretched. The aspect ratio setting is incorrect for the display. Select the appropriate setting for your display. (Page 35) The motor sounds when the ignition switch is turned ON (or is turned to ACC). The unit is confirming whether or not a disc is loaded. This is a normal operation. Symptom Cause Action (Reference page) Nothing is displayed. The touch panel keys cannot be used. The rear view camera is not connected. Camera Polarity is at incorrect setting. Connect a rear view camera. Press the home button to return to the source display and then select the correct setting for Camera Polarity. (Page 39) No xxxx appears when a display is changed (No Title, for example). There is no embedded text information. Switch the display or play another track/file. Subfolders cannot be played back. Folder repeat play has been selected. Select the repeat range again. The repeat Another folder range was selected changes auto- during repeat matically. play. Select the repeat range again. Track search or fast forward/reverse was performed during file repeat play. Select the repeat range again. En 51