Pioneer AVHP7800DVD Other Manual - Page 9

English Español Violet/white See the section "When connecting with a rear view camera". WARNING LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE. Connection method 1. Clamp the lead. 2. Clamp firmly with needle-nosed pliers. Note: • The position of the parking brake switch depends on the vehicle model. For details, consult the vehicle Owner's Manual or dealer. Light green Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch. Deutsch Français Italiano Nederlands PyÒÒÍËÈ Power supply side Ground side Parking brake switch Blue/white To system control terminal of the power amp or Auto-antenna relay control terminal (max. 300 mA 12 V DC). Fuse (4 A) Yellow After making all other connections to this unit, connect this to the positive + terminal of the battery. CAUTION Fuse (10 A) Fuse (10 A) Attach a 20A fuse immediately prior to the battery. Also, use heat resistant battery cable with more than 5-square millimeter sectional area. Black (ground) To vehicle (metal) body. Fig. 4 8