Pioneer AVIC-5100NEX Installation Manual - Page 34
After installing this product, After installation - reset
View all Pioneer AVIC-5100NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Section 04 After installation After installing this product 1 Reconnect the negative (-) terminal of the vehicle's battery. First, double-check that all connections are correct and that this product is installed correctly. Reassemble all vehicle components that you previously removed. Then reconnect the negative (-) cable to the negative (-) terminal of the battery. 2 Start the engine. 3 Press the RESET button. Press the RESET button on this product with a pointed object such as the tip of a pen. 8100NEX 7100NEX 5 Drive down an unobstructed road until the GPS starts receiving the signal normally. Note After installing this product, be sure to check at a safe place that the vehicle is performing normally. 6100NEX 5100NEX p Some of the settings and recorded contents will not be reset. 4 Change the settings as desired. = For details concerning operations, refer to Operation Manual. 34 En