Pioneer AVIC-6000NEX Installation Manual - Page 31
After installing this product, After installation
View all Pioneer AVIC-6000NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
After installation Section 04 English After installing this product 1 Reconnect the negative (-) terminal of the vehicle's battery. First, double-check that all connections are correct and that this product is installed correctly. Reassemble all vehicle components that you previously removed. Then reconnect the negative (-) cable to the negative (-) terminal of the battery. 2 Start the engine. 3 Press the RESET button. Press the RESET button on this product with a pointed object such as the tip of a pen. 8000NEX 7000NEX 5 Drive down an unobstructed road until the GPS starts receiving the signal normally. Note After installing this product, be sure to check at a safe place that the vehicle is performing normally. 6000NEX 5000NEX X8610BS p Some of the settings and recorded contents will not be reset. 4 Change the settings as desired. = For details concerning operations, refer to Operation Manual. En 31