Pioneer AVIC-D2 Other Manual - Page 12
Connecting the power cord 2
View all Pioneer AVIC-D2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting the System Connecting the power cord (2) Speed detection circuit lead Vehicle injection Connector computer Pink (CAR SPEED SIGNAL INPUT) The mobile navigation system is connected here to detect the distance the vehicle travels. Always connect the vehicle's speed detection circuit or the ND-PG1 speed pulse generator, sold separately. Failure to make this connection will increase errors in the location display. IMPROPER CONNECTION MAY RESULT IN SERIOUS DAMAGE OR INJURY INCLUDING ELECTRICAL SHOCK, AND INTERFERENCE WITH THE OPERATION OF THE Connection method VEHICLE'S ANTILOCK BRAKING SYSTEM, AUTOMATIC Pass the extension cord TRANSMISSION AND SPEEDOMETER INDICATION. and the lead for the speed detection circuit through this hole. • It is strongly suggested that the speed pulse wire be connected Clamp firmly with needlenosed pliers. for accuracy of navigation and better performance of interlock. • If the speed pulse wire is unavailable for some reason, it is recommended that the pulse generator (ND-PG1) be used. Notes: Close the cover. • The position of the speed detection circuit and the position of the parking brake switch vary depending on the vehicle model. For details, consult your authorized Pioneer dealer or an installation professional. • Even when the light green lead and the pink lead are connected correctly, a message indicating improper connection is shown until sensor initialization has completed. Light green Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch. If this connection is made incorrectly or omitted, certain functions of your navigation system will be unusable. LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE. Connection method Clamp the parking brake switch power supply side lead. Clamp firmly with needle-nosed pliers. 11 Power supply side Ground side Parking brake switch