Pioneer BDP-52FD Owner's Manual - Page 20

02 Connecting video and Connecting an AV receiver or audio cables amplifier using an optical digital audio cable Note • Make the settings in the Setup Navigator menu according to the type of cable connected (page 24). • To output video signals from this player, connect using a video cable (not including when connected using an HDMI cable). Connecting a TV using a video/audio cable Caution • Connect the player's video output directly to your TV. This player supports the analog copy protection technology. Therefore, the picture may not be displayed properly if this player is connected to a TV via a DVD recorder/video deck or when playing the player's output material that is recorded by a DVD recorder/video deck. Furthermore, the picture may not be displayed properly due to the copy protection when the player is connected to a TV with a built-in video deck. For details, contact the manufacturer of your TV. Player's rear panel Player's rear panel White Optical digital audio cable (commercially available) To optical digital audio input terminal AV receiver or amplifier Red Video/audio cable (included) 2-channel analog audio can also be connected. To audio input terminals Direction of signal flow Note • To switch the video from the AV receiver or amplifier, also connect the video output terminals. Yellow White Red Direction of signal flow Video/audio cable (included) It is also possible to connect to an AV receiver or amplifier. Connect the audio signals using an optical digital audio cable or an audio cable (2 channels) (on the right column). To video/audio input terminals TV Note • Video signals are output with a resolution of 576/50i or 480/60i when this player is connected using a video cable. • Depending on the output video resolution setting, the picture may not be output. 20 En