Pioneer DEH 1600 Owner's Manual - Page 13
Audio Adjustments
View all Pioneer DEH 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Audio Adjustments Section 06 English ! When EQ FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between EQ FLAT and a set equalizer curve. % Press EQ to select the equalizer. Press EQ repeatedly to switch between the following equalizers: SPR-BASSPOWERFULNATURAL VOCALCUSTOMEQ FLAT Adjusting equalizer curves You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM. 1 Press AUDIO to select EQ. Press AUDIO until EQ appears in the display. 2 Press c or d to select the equalizer band to adjust. Each press of c or d selects equalizer bands in the following order: EQ-L (low)EQ-M (mid)EQ-H (high) 3 Press a or b to adjust the level of the equalizer band. Each press of a or b increases or decreases the level of the equalization band. +6 6 is displayed as the level is increased or decreased. # You can then select another band and adjust the level. Note If you make adjustments when a curve other than CUSTOM is selected, the newly adjusted curve will replace the previous curve. Then a new curve with CUSTOM appears on the display while selecting the equalizer curve. Fine adjusting equalizer curve You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ-L/EQ-M/EQ-H). Level (dB) Center frequency Q=2N Q=2W Frequency (Hz) 1 Press AUDIO and hold until frequency and the Q factor (e.g., F- 80 Q 1W) appears in the display. 2 Press AUDIO to select the desired band for adjustment. LowMidHigh 3 Press c or d to select the desired frequency. Press c or d until the desired frequency appears in the display. Low: 4080100160 (Hz) Mid: 2005001k2k (Hz) High: 3k8k10k12k (Hz) 4 Press a or b to select the desired Q factor. Press a or b until the desired Q factor appears in the display. 2N1N1W2W Note If you make adjustments when a curve other than CUSTOM is selected, the newly adjusted curve will replace the previous curve. Then a new curve with CUSTOM appears on the display while selecting the equalizer curve. En 13