Pioneer DEH-1700 Owner's Manual - Page 10

Section 05 Built-in CD Player Playing a CD 1 2 1 Track number indicator Shows the track currently playing. 2 Play time indicator Shows the elapsed playing time of the current track. 1 Insert a CD into the CD loading slot. Playback will automatically start. # Be sure to turn up the label side of a disc. # After a CD has been inserted, press SOURCE to select the built-in CD player. # You can eject a CD by pressing EJECT. 2 Use VOLUME to adjust the sound level. 3 To perform fast forward or reverse, press and hold c or d. 4 To skip back or forward to another track, press c or d. Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track. Notes ! The built-in CD player plays one, standard, 12cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs. ! Do not insert anything other than a CD into the CD loading slot. ! If an error message such as ERROR-11 is displayed, refer to Understanding built-in CD player error messages on page 14. Playing tracks in a random order Random play lets you play back tracks on the CD in a random order. % Press 4 repeatedly to turn random play on or off. When random play is on, RDM appears in the display. Repeating play Repeat play lets you hear the same track over again. % Press 5 repeatedly to turn repeat play on or off. When repeat play is on, RPT appears in the display. # If you perform track search or fast forward/reverse, repeat play is automatically cancelled. Pausing CD playback Pause lets you temporarily stop playback of the CD. % Press 6 repeatedly to turn pause on or off. When pause is on, PAUSE appears in the display. 10 En