Pioneer DEH-33HD Owner's Manual - Page 6

Section 02 Operating this unit Operating this unit 2 Press one of the preset tuning buttons (1 to 6) to select the desired station. # You can also recall stored radio stations by pressing a or b during the frequency display. Switching the display Selecting the desired text information 1 Press . Station name-song title-artist name- album title-genre-frequency Scrolling the tuner information to the left 1 Press and hold . Note Depending on the area, you cannot switch the display. Function settings 1 Press M.C. to display the main menu. 2 Turn M.C. to change the menu option and press to select FUNCTION. 3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. BSM (best stations memory) BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength. 1 Press M.C. to turn BSM on. To cancel, press M.C. again. LOCAL (local seek tuning) Local seek tuning lets you tune in to only those radio stations with sufficiently strong signals for good reception. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting. FM: OFF-LEVEL 1-LEVEL 2-LEVEL 3- LEVEL 4 AM: OFF-LEVEL 1-LEVEL 2 The highest level setting allows reception of only the strongest stations, while lower levels allow the reception of weaker stations. 3 Press M.C. to confirm the selection. SEEK MODE (seek mode) Seek tuning setting can be changed between digital station seek (HD) and analog station seek (ALL) depending on the reception status. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select your favorite setting. ALL-HD BLEND (reception mode) If a digital broadcast reception condition gets poor, this unit automatically switches to the analog broadcast of the same frequency level. If this function is set to on, the tuner switches between digital broadcast and analog broadcast automatically. If this function is off, reception will be conducted within an analog broadcast. 1 Press M.C. to turn this function on or off. Note If SEEK MODE is set to HD and BLEND is set to off, the tuner cannot receive broadcasts. In this case, the seek mode or reception mode is changed automatically as follows: ! When SEEK MODE is set to HD, if you switch BLEND from on to off, SEEK MODE is changed to ALL. ! When BLEND is set to off, if you switch SEEK MODE from ALL to HD, BLEND is changed to on. CD/CD-R/CD-RW and USB storage devices Basic Operations Playing a CD/CD-R/CD-RW 1 Insert the disc into the disc loading slot with the label side up. Ejecting a CD/CD-R/CD-RW 1 Press h. Playing songs on a USB storage device 1 Open the USB connector cover and plug in the USB storage device using a USB cable. Stopping playback of files on a USB storage device 1 You may disconnect the USB storage device at any time. Selecting a folder 1 Press a or b. Selecting a track 1 Press c or d. Fast forwarding or reversing 1 Press and hold c or d. ! When playing compressed audio, there is no sound during fast forward or reverse. Returning to root folder 1 Press and hold B (BAND/ESC). Switching between compressed audio and CD-DA 1 Press B (BAND/ESC). Note Disconnect USB storage devices from the unit when not in use. Displaying text information Selecting the desired text information 1 Press . Scrolling the text information to the left 1 Press and hold . Notes ! Depending on the version of iTunes used to write MP3 files to a disc or media file types, incompatible text stored within an audio file may be displayed incorrectly. ! Text information items that can be changed depend on the media. Selecting and playing files/ tracks from the name list 1 Press to switch to the file/track name list mode. 2 Use M.C. to select the desired file name (or folder name). Changing the file or folder name 1 Turn M.C. Playing 1 When a file or track is selected, press M.C. Viewing a list of the files (or folders) in the selected folder 1 When a folder is selected, press M.C. Playing a song in the selected folder 1 When a folder is selected, press and hold M.C. 6 En