Pioneer DEH-P390MP Owner's Manual - Page 13

Built-in CD Player Section 05 English Playing a CD 1 ! When a CD TEXT disc is inserted, text informa- tion currently selected on Using CD TEXT func- tions on page 16 automatically begins to 2 scroll in the display. 3 1 Track number indicator Shows the track number currently playing. 2 Play time indicator Shows the elapsed playing time of the current track. 3 RPT indicator Shows when repeat play is turned on. 1 Insert a CD into the CD loading slot. Playback will automatically start. # Be sure to turn up the label side of a disc. # After a CD has been inserted, press SOURCE to select the built-in CD player. # You can eject a CD by pressing EJECT. 2 To perform fast forward or reverse, press and hold c or d. # If you select ROUGH, pressing and holding c or d enables you to search every 10 tracks in the current disc. (Refer to Searching every 10 tracks in the current disc on the next page.) 3 To skip back or forward to another track, press c or d. Notes ! Read the precautions with discs and player on page 39. ! If an error message such as ERROR-11 is displayed, refer to Understanding built-in CD player error messages on page 39. Introduction of advanced built-in CD player operation % Press FUNCTION to display the function names. Press FUNCTION repeatedly to switch between the following functions: RPT (repeat play)-RDM (random play)- SCAN (scan play)-PAUSE (pause)-COMP (compression and BMX)-FF/REV (search method) # To return to the playback display, press BAND. # If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. Repeating play Repeat play lets you hear the same track or disc over again. 1 Press FUNCTION to select RPT. 2 Press c or d to select the repeat range. ! DSC - Repeat the current disc ! TRK - Repeat just the current track Note If you perform track search or fast forward/reverse during TRK, the repeat play range changes to DSC. En 13