Pioneer DEH-P6000UB Other Manual - Page 2

Connecting the unit English When not connecting a rear speaker lead to a subwoofer Connecting the unit English 1.5 m (4 ft. 9 in.) USB cable Connect to separately sold USB device. 20 cm (7-7/8 in.) Antenna jack Rear output 15 cm (5-7/8 in.) Front output This product Wired remote input Hard-wired remote control adaptor can be connected (sold separately). Subwoofer output Fuse (10 A) AUX jack (3.5 φ) Use a stereo mini plug cable to connect with auxiliary device. Yellow Connect to the constant 12 V supply terminal. IP-BUS input (Blue) Multi-CD player IP-BUS cable (sold separately) Red Connect to terminal controlled by ignition switch (12 V DC). Orange/white Connect to lighting switch terminal. Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. Black (chassis ground) Connect to a clean, paint-free metal location.  Front speaker  Left  Rear speaker  White Gray White/black Green Gray/black Violet Green/black Violet/black  Front speaker  Right  Rear speaker  With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. To rear output To front output To subwoofer output Connect with RCA cables (sold separately) Power amp (sold separately) Power amp (sold separately) Power amp (sold separately) System remote control Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). Perform these connections when using the optional amplifier.  Subwoofer   Front speaker   Rear speaker   Subwoofer   Front speaker   Rear speaker  Connecting the unit English When using a subwoofer without using the optional amplifier Connecting the unit English 1.5 m (4 ft. 9 in.) USB cable Connect to separately sold USB device. Antenna jack Rear output This product 15 cm (5-7/8 in.) Front output Subwoofer output Fuse (10 A) AUX jack (3.5 φ) Use a stereo mini plug cable to connect with auxiliary device. 20 cm (7-7/8 in.) Wired remote input Hard-wired remote control adaptor can be connected (sold separately). IP-BUS input (Blue) Multi-CD player IP-BUS cable (sold separately) Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. Yellow Connect to the constant 12 V supply terminal. Red Connect to terminal controlled by ignition switch (12 V DC). Orange/white Connect to lighting switch terminal. Black (chassis ground) Connect to a clean, paint-free metal location. Note Change the initial setting of this unit. The subwoofer output of this unit is monaural.  Front speaker  Left  Subwoofer (4 Ω)  White Gray White/black Gray/black Green Violet Green/black Violet/black  Front speaker  Right  Subwoofer (4 Ω)  When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not connect anything with Green and Green/black leads. Not used. Green Green/black Violet Violet/black  Subwoofer (4 Ω)  2 