Pioneer DEH-P6600 Owner's Manual - Page 26
Introduction of audio, adjustments, Compensating for, equalizer curves EQ-EX, Setting the sound focus - bass treble
View all Pioneer DEH-P6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Section 07 Audio Adjustments Introduction of audio adjustments Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. 1 1 Audio display Shows the audio adjustments status. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: Fad (balance adjustment)EQ (equalizer curve adjustment)Bass (bass and treble level adjustment)Loud (loudness) Sub-W1 (subwoofer on/off setting)/NonFad (non fading output on/off setting)Sub-W2 (subwoofer setting)/NonFad (non fading output setting)HPF (high pass filter)SLA (source level adjustment) # If EQ-EX function has been selected and only when EQ-EX is turned on and CUSTOM is selected as the equalizer curve, you can switch to Bass. # When the subwoofer controller setting is only PREOUT:FULL, you cannot switch to Sub-W1. (Refer to page 33.) # You can select the Sub-W2 only when subwoofer output is turned on in the Sub-W1. # When the subwoofer controller setting is only PREOUT:FULL, you can switch to the nonfading output on/off setting. (Refer to page 33.) # You can select the nonfading output setting only when nonfading output is turned on in the nonfading output on/off setting. # When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the display of each source, press BAND. Compensating for equalizer curves (EQ-EX) The EQ-EX function smoothes the effects of each equalizer curve. Furthermore, you can adjust bass and treble for each source when CUSTOM curve is selected. ! If SFEQ has been previously selected, press EQ-EX and hold to switch to EQ-EX and EQ-EX indicator appears in the display. % Press EQ-EX to turn EQ-EX on. EQ-EX ON appears in the display. EQ-EX is now on. # To turn EQ-EX off, press EQ-EX. Setting the sound focus equalizer (SFEQ) Clarifying the sound image of vocals and instruments allows the simple staging of a natural, pleasant sound environment. Even greater listening enjoyment will be obtained if seating positions are chosen carefully. FRT1 boosts the treble on the front output and the bass on the rear output. FRT2 boosts the treble and the bass on the front output and the bass on the rear output. (The bass boost is the same for both front and rear.) For both FRT1 and FRT2, H setting provides a more pronounced effect than L setting. 26 En