Pioneer DEH-P6900UB Other Manual - Page 2

Connecting the Units 7 When not connecting a rear speaker lead to a Subwoofer 1.5 m (4 ft. 9 in.) 20 cm (7-7/8 in.) USB cable Connect the USB portable audio player or USB memory (sold separately). Front output Antenna jack 16 cm (6-1/4 in.) Rear output This product Subwoofer output AUX jack (3.5 ø) Use a stereo mini plug cable to connect with auxiliary equipment. IP-BUS input (Blue) IP-BUS cable Wired remote input Hard-wired remote control adaptor can be connected (sold separately). Multi-CD player (sold separately) Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. Fuse (10 A) Yellow Connect to the constant 12 V supply terminal. Fuse resistor Red Connect to terminal controlled by ignition switch (12 V DC). Fuse resistor Orange/white Connect to lighting switch terminal. Black (chassis ground) Connect to a clean, paint-free metal location. Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). + Front speaker ≠ + Front speaker ≠ Left + Rear speaker ≠ White White/black Green Green/black With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. + Rear speaker ≠ Perform these connections when using the optional amplifier. + Subwoofer ≠ Power amp (sold separately) Power amp (sold separately) Connect with RCA cables (sold separately) Power amp (sold separately) System remote control Gray Gray/black Violet Violet/black + Front speaker ≠ + Front speaker ≠ Right + Rear speaker ≠ + Rear speaker ≠ + Subwoofer ≠ ENGLISH 7 When using a Subwoofer without using the optional amplifier 1.5 m (4 ft. 9 in.) 20 cm (7-7/8 in.) USB cable Connect the USB portable audio player or USB memory (sold separately). Front output Antenna jack 16 cm (6-1/4 in.) Subwoofer output This product Subwoofer output AUX jack (3.5 ø) Use a stereo mini plug cable to connect with auxiliary equipment. Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. Fuse (10 A) IP-BUS input (Blue) IP-BUS cable Wired remote input Hard-wired remote control adaptor can be connected (sold separately). Multi-CD player (sold separately) Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). Yellow Connect to the constant 12 V supply terminal. Fuse resistor Red Connect to terminal controlled by ignition switch (12 V DC). Fuse resistor Orange/white Connect to lighting switch terminal. + Front speaker ≠ Left Subwoofer (4 Ω) + ≠ White Gray White/black Gray/black Green Violet Green/black Violet/black + Front speaker ≠ Right + Subwoofer (4 Ω) ≠ Black (chassis ground) Connect to a clean, paint-free metal location. When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not connect anything with Green and Green/black leads. Note: Change the initial setting of this unit (refer to the Operation Manual). The subwoofer output of this unit is monaural. Not used. Green Violet Green/black Violet/black + Subwoofer (4 Ω) × 2 ≠