Pioneer DEH-P7000BT Owner's Manual - Page 9
Resetting the microprocessor, Use and care of the remote, control, Before You Start
UPC - 012562886220
View all Pioneer DEH-P7000BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Before You Start Section 01 % Press RESET with a pen tip or other pointed instrument. Before You Start 3 Put the front panel into the provided protective case for safe keeping. Attaching the front panel % Reattach the front panel by holding it upright to the unit and clipping it securely into the mounting hooks. Resetting the microprocessor The microprocessor must be reset under the following conditions: ! Prior to using this unit for the first time after installation ! If the unit fails to operate properly ! When strange or incorrect messages ap- pear on the display RESET button Use and care of the remote control Installing the battery Slide the tray on the back of the remote control out and insert the battery with the plus (+) and minus (-) poles aligned properly. ! When using for the first time, pull out the film protruding from the tray. WARNING Keep the battery out of the reach of children. Should the battery be swallowed, consult a doctor immediately. CAUTION ! Use one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not used for a month or longer. ! There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. ! Do not handle the battery with metallic tools. ! Do not store the battery with metallic objects. En 9