Pioneer DEH-X4900BT Owner s Manual - Page 6

4 Press the M.C. dial to confirm the settings. NOTES • You can cancel the menu setting by pressing SRC/OFF. • These settings can be made at any time from the SYSTEM settings (page 16) and INITIAL settings (page 6). Canceling the demonstration display (DEMO OFF) 1 Press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select [SYSTEM], then press to confirm. 3 Turn the M.C. dial to select [DEMO OFF], then press to confirm. 4 Turn the M.C. dial to select [YES], then press to confirm. INITIAL settings 1 Press and hold SRC/OFF until the unit turns off. 2 Press the M.C. dial to display the main menu. 3 Turn the M.C. dial to select [INITIAL], then press to confirm. 4 Turn the M.C. dial to select an option, then press to confirm. Menu Item SP-P/O MODE [REAR/SUB.W] [SUB.W/SUB.W] [REAR/REAR] Description Select when there is a full-range speaker connected to the rear speaker output leads and there is a subwoofer connected to the RCA output. Select when there is a passive subwoofer connected directly to the rear speaker output leads and there is a subwoofer connected to the RCA output. Select when there are full-range speakers connected to the rear speaker output leads and RCA output. If there is a full-range speaker connected to the rear speaker output leads, and the RCA output is not used, you may select either [REAR/SUB.W] or [REAR/REAR]. 6 En Menu Item Description S/W UPDATE Select to confirm the latest system information on the unit. [SYSTEM INFO] [SYSTEM UPDATE] Select to update the unit to the latest software and initialize the unit settings. For details on the latest software and updating, visit our website. [BT VERSION] Select to display the system version of the unit and the Bluetooth module. [BT UPDATE] Select to update the unit to the latest Bluetooth software. For details on Bluetooth software and updating, visit our website. SYSTEM RESET [YES], [NO] Select [YES] to initialize the unit settings. The unit will be restarted automatically. (Some of the settings will be retained even after resetting the unit, such as Bluetooth pairing information, etc.) Radio The tuner frequencies on this unit are allocated for use in North America. Use in other areas may result in poor reception. Receiving preset stations 1 Press SRC/OFF to select [RADIO]. 2 Press BAND/ to select the band from [FM1], [FM2], [FM3] or [AM]. 3 Press a number button (1/ to 6/ ). TIP The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the FUNCTION settings (page 15). Best stations memory (BSM) The six strongest stations are stored on the number buttons (1/ to 6/ ). 1 After selecting the band, press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select [FUNCTION], then press to confirm. 3 Turn the M.C. dial to select [BSM], then press to confirm.