Pioneer DEH-X6500BT Owner's Manual - Page 20
Troubleshooting, Error messages, Additional information - amp error
View all Pioneer DEH-X6500BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Appendix Additional information Additional information Troubleshooting Symptom Cause Action The display automatically returns to the ordinary display. You did not perform any operation within about 30 seconds. Perform operation again. The repeat play range changes unexpectedly. Depending on Select the repeat the repeat play play range again. range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing. A subfolder is not played back. Subfolders cannot be played when FLD (folder repeat) is selected. Select another repeat play range. NO XXXX appears when a display is changed (NO TITLE, for example). There is no embedded text information. Switch the display or play another track/file. The unit is malfunctioning. There is interference. You are using a device, such as a cellular phone, that transmits electric waves near the unit. Move electrical devices that may be causing the interference away from the unit. Symptom Cause Action The sound from the Bluetooth audio source is not played back. There is a call in The sound will be progress on a played back when Bluetooth con- the call is terminected cellular nated. phone. A Bluetooth connected cellular phone is currently being operated. Do not operate the cellular phone at this time. A call was Reconnect the made with a Bluetooth con- Bluetooth con- nection between nected cellular this unit and the phone and then cellular phone. immediately ter- minated. As a result, commu- nication be- tween this unit and the cellular phone was not terminated properly. Error messages When you contact your dealer or your nearest Pioneer Service Center, be sure to note the error message. 20 En Common Message Cause Action AMP ERROR Unit fails to operate or speaker connection is incorrect; protective circuit is activated. Check the speaker connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or an authorized Pioneer Service Station for assistance. CD player Message Cause Action ERROR-07, The disc is dirty. Clean the disc. 11, 12, 17, 30 The disc is Replace the disc. scratched. ERROR-07, 10, 11, 12, 15, 17, 30, A0 There is an elec- Turn the ignition trical or me- switch OFF and chanical error. back ON, or switch to a differ- ent source, then back to the CD player. ERROR-15 The inserted disc is blank. Replace the disc. ERROR-23 Unsupported CD format. Replace the disc. FORMAT READ Sometimes Wait until the there is a delay message disap- between the pears and you start of playback hear sound. and when you start to hear any sound. Message NO AUDIO SKIPPED PROTECT Cause Action The inserted disc does not contain any playable files. Replace the disc. The inserted disc contains DRM protected files. Replace the disc. All the files on the inserted disc are embedded with DRM. Replace the disc. USB storage device/iPod Message Cause Action FORMAT READ NO AUDIO SKIPPED Sometimes Wait until the there is a delay message disap- between the pears and you start of playback hear sound. and when you start to hear any sound. There are no songs. Transfer the audio files to the USB storage device and connect. The connected Follow the USB USB storage de- storage device in- vice has secur- structions to dis- ity enabled. able the security. The connected Play an audio file USB storage de- not embedded vice contains with Windows files embedded Media DRM 9/10. with Windows Mediaä DRM 9/ 10.