Pioneer DJM-900NXS2 Owner's Manual - Page 20

SND/RTN (MIDI LFO) Connect an external effector, etc., here. By pressing the [LFO FORM (WAKE UP)] button, MIDI-compatible software and devices can be controlled using MIDI signals.  SND/RTN1 Connect an external effector, etc., here. SEND RETURN 0 0 0 12 12 12 12 TALK OFF ON OVER 9 9 9 9 -26 / 6 -26 / 6 -26 / 6 -26 / 6 -26 / 6 -26 / 6 -26 / 6 -26 / 6 -26 / 6 -26 / 6 -26 / 6 -26 / 6 Effector DJM-900nexus BEAT c, d buttons (parameter 1) - TIME control (parameter 2) - LEVEL/DEPTH control (parameter 3) This adjusts the sound level input to the [RETURN] terminal. X-PAD (parameter 4) -  MIDI LFO The MIDI signal (0 - 127) waveform is changed according to the track's tempo. The MIDI signal waveform pattern switches each time the [LFO FORM (WAKE UP)] button is pressed. BEAT c, d buttons (param- Use these to set a waveform output time of 1/4 - 64/1 with eter 1) respect to one beat of the BPM. TIME control (parameter 2) Use this to set the waveform output time. LEVEL/DEPTH control (parameter 3) - X-PAD (parameter 4) This changes the MIDI signal's waveform pattern. ! When [MIDI LFO] is selected, the sound of the external effector connected to the [RETURN] terminal is not input. 1 If the sound of the channel you want to monitor is not output from the [MASTER] channel when [CF.A], [CF.B] or [MASTER] is selected with the [1, 2, 3, 4, MIC, CF.A, CF.B, MASTER] selector switch, the effect sound cannot be monitored even by pressing the [CUE] button for [BEAT EFFECTS]. 2 If the effect is off, the effect sound cannot be monitored even by pressing the [CUE] button for [BEAT EFFECTS]. 20 En